Unsealed wood up here doesn't last
Mountain wood deals with UV roughly 50% stronger than sea level, freeze-thaw cycles that drive water deep into the grain, and snow that sits wet on horizontal surfaces for weeks. Untreated wood can cup, split, or rot in 2–3 seasons.
Right product, right time, prepped wood
We use stains and sealers, matched to substrate (cedar, redwood, pressure-treated pine, log, ipe). Penetrating oil-based products handle UV and water differently than film-forming acrylics. We pick based on the wood and your maintenance preferences.
What we stain and seal
Decks, fences and gates, log home siding, exposed timbers, cedar shake, pergolas, sheds and outbuildings, and wood retaining walls. Pressure washing or strip-and-prep is included where needed.
Maintenance schedule, mountain edition
Most mountain decks need re-staining every 2–4 years depending on exposure. Log home siding usually goes 3–5 years between re-coats. We come back on a schedule rather than waiting for failure.
Frequently Asked Questions
How often should I restain my deck in Colorado?
Most decks at altitude need a refresh every 2-4 years, depending on exposure. South- and west-facing wood gets hit harder by UV, and horizontal surfaces (like deck boards) wear faster than vertical (like railings). We can assess and recommend timing during a walk-through.
Do you handle log siding restoration?
Yes. Log home maintenance is a regular part of our work. That includes power-washing, media blasting where needed, repair of failed chinking, and restaining or resealing. Common in Park County and across Summit County mountain homes.
What's the difference between stain and sealer?
Stain adds color and protection. Sealer (clear) adds protection without changing the look. Most exterior wood at altitude needs a stain because UV degrades clear sealers fast. We match the product to the wood and the look you're going for.
When is the best time to stain or seal?
Spring and fall, when temperatures are stable and there's enough warmth for the product to cure. Most stains need surface temps above 50°F and several dry days post-application. Booking early matters because the windows are short.
Can you fix a deck that's already cupped or split?
Sometimes. Mild cupping can sometimes be sanded and refinished. Heavy cupping, split boards, or rot usually means board replacement. We'll inspect and tell you honestly what's salvageable and what needs to come out.
Ready before snow flies?
Stain and seal jobs need warm, dry weather to cure. Spring and fall windows fill up. Book early.